Need help installing 2nd HD
Jonathan Bayer
jbayer at ispi.UUCP
Thu Mar 23 01:08:10 AEST 1989
In article <16070 at cup.portal.com> Chip_N_Oliver at cup.portal.com writes:
>Situation: I have stumbled upon an AT clone running Xenix V2.2. The
[deleted]
>to "enable" the second drive. I then ran dparam and set /dev/hd10
>identical to /dev/hd00 (or was it /dev/rhd00 and /dev/rhd10).
>
>I thought I was home free when badtrk ran a successful non-destructive
>scan of the second disk. However, when I try to mount or fsck the second
>hd, I get the following:
>
># mount /dev/hd10 /u
^^^^^^^^^^^^^^^
if you are going to do it this way you will want to use /dev/hd1? where
the ? is the partition number you want to mount. hd10 refers to the
entire hard disk.
>
> mount: mount failed
> mount: structure needs cleaning
>
JB
--
Jonathan Bayer Beware: The light at the end of the
Intelligent Software Products, Inc. tunnel may be an oncoming dragon
19 Virginia Ave. ...uunet!ispi!jbayer
Rockville Centre, NY 11570 (516) 766-2867 jbayer at ispi.UUCP
More information about the Comp.unix.xenix
mailing list